Automatic air traps allow air to escape during the priming of
piping systems, filling of closed tanks, receivers and air
This mechanical style float air vent trap is designed to remove
high volumes of air from liquids under pressure up to 250 PSIG.
Air and steam can pass from the inlet at the bottom through the open valve at the top until the body fills with condensate, causing the stainless steel float to rise and close the valve.
Applications for high capacity venting applications include venting air from dry cleaning solvent filters, venting air and carbon dioxide from entrained air separation tanks, air trapped in high points of supply lines and receiving tanks.
All of the internal components are made of non-magnetic 18-8 stainless steel and connected to the trap cover for easy inspection. The trap bodies are cast from iron, steel or stainless steel depending upon the compatibility requirements.
|PRESSURE||APPROXIMATE CAPACITY [SCFM] BY ORIFICE SIZE|